reversible impact hammer crusher
Reversible impact hammer crusher introduction
The reversible impact hammer crusher is a crusher that can be positively and reversely developed on the basis of advanced foreign equipment. Applicable to cement, electric power, metallurgy, mining and other industries, such as: limestone, vermiculite, slag, raw coal and anthracite, medium and fine crushing and fine crushing operations.
The compressive strength of the material is ideal below 300MPa, and it is equipped with hydraulic and mechanical adjustment clearance system to ensure the high degree of automation and safe operation of the reversible impact hammer crusher.
Equipment working principle
The motor + fluid coupling (or driven by the pulley or driven by the reducer) drives the rotor rotating at high speed, and the high-speed hammer is arranged by the spiral suspension on the rotor, and the high-speed impact is fed from the upper part of the crusher. The material is directly cut into the joint between the hammer head and the wavy lining, and then hammered, sheared, squeezed, ground and pulverized between materials.
The broken qualified material is discharged from the bottom, and the rotor can be positive and negative. Rotating in one direction, it takes one month to change the direction of rotation to ensure the symmetrical wear of the hammer head, which reduces the labor intensity of the workers and helps to improve the service life of the hammer head. It does not need to manually clean the cavity.
Reversible impact hammer crusher advantages
1. The fineness of the discharge granularity is high, and the proportion of the discharge granularity of ≤3mm accounts for 90%–92%;
2. The advantages of counterattack, hammer and ring hammer crushers are reflected;
3. Hydraulic two-way opening side frame for easy maintenance and maintenance;
4. The crushing ratio is large, the wearing parts have a long service life (6-8 months), high efficiency, energy saving, and the use cost is greatly reduced.
Order notes
1. Material characteristics, feeding size and discharging size should be presented in the contract.
2. The equipment is supplied as right-installed generally. Please specify in the contract if it needs to be installed at left.
3. Lubrication system is usually supplied with nipples mode. Please specify in the contract if centralized lubrication and electrical lubrication are required.
4. Standard configuration does not contain the electrical control. If needed, please specify in the contract.
Parameters of reversible impact hammer crusher
Model |
Roller dia.(mm) |
Roller length(mm) |
Feeding size(mm) |
Discharging size(mm) |
Capacity (t/h) |
Motor power(kw) |
Weight(t) |
Outline size (mm) |
||
Length |
Width |
Height |
||||||||
PFCK-0606 |
600 |
600 |
≤60 |
≤6 |
20 |
55 |
3.2 |
2321 |
1640 |
1150 |
PFCK-0808 |
800 |
800 |
≤80 |
≤10 |
45 |
90 |
6.1 |
2669 |
1840 |
1446 |
PFCK-1010 |
1000 |
1000 |
≤80 |
≤10 |
80 |
132 |
10.8 |
3165 |
2311 |
1810 |
PFCK-1016 |
1000 |
1600 |
≤80 |
≤10 |
120 |
220 |
14.6 |
4999 |
2253 |
1710 |
PFCK-1212 |
1200 |
1200 |
≤80 |
≤10 |
150 |
280 |
17.5 |
4799 |
2660 |
2140 |
PFCK-1216 |
1200 |
1600 |
≤80 |
≤10 |
200 |
355 |
23.4 |
5039 |
2660 |
2140 |
PFCK-1413 |
1400 |
1300 |
≤80 |
≤10 |
250 |
400 |
24.7 |
5284 |
2975 |
2580 |
PFCK-1616 |
1600 |
1600 |
≤80 |
≤10 |
300 |
450 |
35.2 |
5720 |
4811 |
2954 |
PFCK-1618 |
1600 |
1800 |
≤80 |
≤10 |
350-400 |
630 |
39.8 |
6406 |
3586 |
3016 |
PFCK-2022 |
2000 |
2200 |
120 |
≤10 |
450-550 |
630-800 |
49.6 |
8985 |
4270 |
4063 |